H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 52)

44
Installing the mounting brackets and cable
management bracket
To enable equipment installation in a rack and facilitate cable management, a pair of mounting brackets
and a cable management bracket is supplied with the WX6103 access controller. You need to assemble
the cable management bracket and the mounting brackets together before installing them to the access
controller chassis.
Attaching the cable management bracket to the left mounting
bracket
Attach the cable management bracket onto the left mounting bracket as shown in Figure 38 .
Figure 38 Attach the cable management bracket to the left mounting bracket
1: Left mounting bracket 2: Cable management bracket 3: Right mounting bracket