Bootware submenus, Serial interface submenu, Ethernet interface submenu – H3C Technologies H3C WX6000 Series Access Controllers User Manual

Page 74

Advertising

You have three chances to enter the BootWare password (the initial password is null). If you fail to enter

the correct password three times in a row, the system will be halted and you can only restart the system.

After you provide the correct password, the system enters the BootWare main menu:

Note: The current operating device is cfa0

Enter < Storage Device Operation > to select device.

=============================<EXTEND-BOOTWARE MENU>=======================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Modify BootWare Password |

|<6> Skip Current System Configuration |

|<7> BootWare Operation Menu |

|<8> Clear Super Password |

|<9> Storage Device Operation |

|<0> Reboot |

==========================================================================

Enter your choice(0-9):

BootWare submenus

Serial interface submenu

You can upgrade the application program, change the serial interface baud rate and so on through this

submenu.
Select 2 in the BootWare main menu to enter the serial interface submenu:

=============================<Enter Serial SubMenu>======================

|Note:the operating device is cfa0 |

|<1> Download Application Program To SDRAM And Run |

|<2> Update Main Application File |

|<3> Update Backup Application File |

|<4> Update Secure Application File |

|<5> Modify Serial Interface Parameter |

|<0> Exit To Main Menu |

==========================================================================

Enter your choice(0-5):

Ethernet interface submenu

You can upgrade applications and modify Ethernet interface parameters in the Ethernet interface
submenu.
Select 3 in the BootWare main menu to enter the Ethernet interface submenu. The system displays the

following information:

============================<Enter Ethernet SubMenu>============================