H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 78)

70
Figure 50 Modify the baud rate
Step5 Select Call > Call to reestablish the connection.
Figure 51 Reconnect the call
Step6 Then, press Enter in the serial interface submenu. The system prompts the current baud rate and returns
to the parent menu.
The current baudrate is 115200 bps
===============================<BAUDRATE SET>=============================
|Note:'*'indicates the current baudrate |
| Change The HyperTerminal's Baudrate Accordingly |
|---------------------------<Baudrate Avaliable>---------------------------|
|<1> 9600(Default)* |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200 |
|<0> Exit |
==========================================================================