Maintaining application and configuration files, To view all files – H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 86
78
.....................................................................................
........................................................................Done!
Step5
Select 0 to return to the BootWare main menu.
Step6
Select 1 in the BootWare main menu to reboot the access controller.
CAUTION:
•
If the downloaded file has the same file name with an existing file in the CF card, the system prompts The
file is exist, will you recover it? [Y/N]. If you choose Y, the existing file will be overwritten.
•
Make sure that sufficient space is available in the CF card. In case of insufficient space, the system will
give a prompt message.
•
The new application file directly replaces the existing file of the same type. In this example, the
downloaded file wx6103.bin replaces the existing application file of the type M and becomes the only
main application file.
•
For more information about the application file types, see “
.”
Maintaining application and configuration files
You can use the file control submenu to modify and display file types.
Select 4 in the BootWare main menu to enter the file control submenu.
The following information appears on an EWPX1WCMB0:
===============================<File CONTROL>===============================
|Note:the operating device is cfa0 |
|<1> Display All File(s) |
|<2> Set Application File type |
|<3> Set Configuration File type |
|<4> Delete File |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
NOTE:
The default configuration file type of the EWPX1WCMB0 is N/A. You cannot change the file type.
The following information appears on an EWPX1WCMD0:
=================================<File CONTROL>=================================
|Note:the operating device is cfa0 |
|<1> Display All File(s) |
|<2> Set Application File type |
|<3> Delete File |
|<0> Exit To Main Menu |
================================================================================
Enter your choice(0-3):
To view all files
Select 1 in the file control submenu. The following information appears:
Display all file(s) in cfa0: