Grass Valley iControl V.4.43 - Manual (Page 189)

iControl
User Guide
179
Figure 4-98
4. Enter a new name for the template, and then click OK.
Removing an Incident Log Template
Removing an Incident Template using the Incident Templates Window
To remove an incident template using the Incident Templates window
1. In Incident Log Viewer, on the File menu, click Incident templates.
The Incident Templates window appears.
Figure 4-99
2. Select the incident template(s) you wish to remove.
3. Click Remove.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened iC Navigator (see page 719 ).
• You have opened Incident Log Viewer (see page 724 ).