Grass Valley iControl V.4.43 - Manual (Page 649)

iControl
User Guide
639
Opening an Existing Remote Site
To open an existing remote site:
1. From the iControl Web Creator welcome window, enter the IP address of the Application
Server to which the site has been published (e.g., 10.0.3.6 ) in the Open remote site data
box.
Figure 11-13
The 2nd window appears iControl Web Creator welcome window appears.
Figure 11-14
2. Select the IP address of the remote site’s Application Server in the Open remote site list, or
type the IP address.
The Select site on window appears.