Grass Valley iControl V.4.43 - Manual (Page 300)

Configuring Devices & Services
Copying Card Alarm Configurations
290
Figure 5-79
3. Click Copy to other cards.
The Copy to other cards window appears, displaying a list of all cards of the same type.
Figure 5-80
4. For each card to which you wish to copy the current alarm configuration, select the
corresponding check box.
5. Select the All check box at the top of the column to select all the available cards.
6. Select the All check box a second time to remove all check marks.
7. Click Copy.
A successful copy is indicated for each card by the appearance of the word Succeeded in the
Transfer status column.
8. Click Close to close the Copy to other cards window.