Grass Valley iControl V.4.43 - Manual (Page 224)

Logs
Opening a Loudness Log File in Loudness Analyzer
214
Figure 4-162
4. In the Open Logs window, in the Audio Descriptor list, select the desired loudness dataset
to analyze.
IMPORTANT: System behavior
• If, in addition to mounting the NAS drive to the loudness directory of your
Application Server, you have also mapped the NAS drive as a local drive on
your client PC, then the address you type or paste should point to this
mapped local drive, such as the following:
W:\
Otherwise, the address and path should be in the following format:
\\<IP address of NAS drive>\<path to directory with loudness
data>
• If you have NOT mounted the NAS drive as a local drive on your client PC,
when you type the path to the loudness directory, you must include at
least one directory level in this path.
Simply typing \\<IP address>\ is insufficient and you will be unable to
browse the NAS directories.
Note: The dataset may contain one file or several files. The number of files in each
dataset is indicated in parentheses.