Grass Valley iControl V.4.43 - Manual (Page 541)

iControl
User Guide
531
Adding an Object from an SNMP Table
This procedure applies to MIB parameters that are contained in an SNMP table.
To add a third-party SNMP alarm object to a Web page
1. In iC Creator, open a Web page.
2. On the View menu, click Open MIB Browser.
Figure 8-146
The MIB Browser window opens.
Figure 8-147
3. On the File menu, click Load MIBs from application server.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see page 696 ).
• you have opened iC Creator (see page 746 ).