Grass Valley iControl V.4.43 - Manual (Page 317)

iControl
User Guide
307
Resetting the Admin User Password on an iControl Application Server
To reset the admin user password on an iControl Application Server
1. On the Access Control Configuration Form, in the list under Domains Managed Here,
select the current domain (the one to which the Application Server belongs).
Figure 6-5
2. Click Reset admin account.
3. In the window that appears, type a new password, and then click OK.
Figure 6-6
4. When prompted, re-type the new password to confirm it, and then click OK.
Figure 6-7
In a few moments, the Webmin page reloads, indicating the admin account has been reset.
REQUIREMENT
Before beginning this procedure, make sure you have opened the Access Control
Configuration Form in iControl (see
page 703 ).