Grass Valley PDR v.2.2 - Manual (Page 264)

Chapter 9 Using the List Manager
246 Profile Family
Reusing a List
There are two ways to reuse a list that you created earlier:
1. In the Edit window, choose File | Open and select the desired list. When the
list opens, choose Edit | Schedule List to integrate the list into the Master
List.
2. In the Monitor view, drag the list from a Media Manager window to the
Master List. The dragged events are added to the bottom of the Master List.
Make sure you select the appropriate channel before dragging in the list, then
change the Channel settings to match.
In either case, List Manager checks for conflicts with events already in the
Master List. If it finds any conflicts, such as events using the same channel or
output at the same time, it will report these errors so that you can take corrective
action. The word Error will appear in the status cell of the event causing the
conflict. Right-click on the event, choose Event Property (Alt-Enter), and read
the error information in the Event Properties dialog box. You can also double-
click the event to get properties.
Closing a List
To close a list:
• Choose File | Close List .
Exporting a List
To export a list into an ASCII text file (.lst):
1. Click the Edit window tab.
2. Choose File | Export . A dialog box appears.
3. Enter the a name of the file you want to save in the File Name box.
4. Click OK . The .lst extension is added to the file name automatically.