Grass Valley PDR v.2.2 - Manual (Page 292)

Chapter 10 Using TimeDelay
274 Profile Family
Assigning Timecode Crosspoints
The Timecode Crosspoint dialog box controls the connections of timecode
signals within the disk recorder.
• Timecode inputs (top-left corner) represent either LTC input connectors on
the back panel or VITC input signals (carried in the vertical interval of the
associated video signal on a video input connector). timecode inputs can be
connected to timecode recorders for recording onto disk.
• Timecode generators (below timecode inputs) represent timecode generators
used by the panels. timecode generators can be connected to timecode
recorders for recording onto disk or to timecode outputs.
• Timecode outputs (top-right corner) represent either LTC output connectors
on the back panel, or VITC output signals (inserted into the vertical interval
of the associated video signal on a video output connector). timecode outputs
can be connected to timecode recorders for playback of recorded material
from disk, to timecode inputs, or to timecode generators.
1. Choose Window | Timecode Crosspoint to access the Timecode Crosspoint
dialog box. The green boxes indicate the current connections. For example,
a green box at the intersection of TCRec#1 and LTC1In1 indicates the
timecode signal from the back panel input LTC1In1 is recorded by timecode
recorder #1.
Figure 145. Timecode crosspoint dialog box