Grass Valley PDR v.2.2 - Manual (Page 279)

Record Panel Controls
Profile Family 261
5. Largest Delay displays the maximum amount of delay time configured for
this panel. The default value (displayed in red) shows the maximum amount
available on the disk recorder. A user-specified value appears in black.
6. Start Time sets the start time for the clip, entered as the month, day, and
time (based on the clock in the NT computer). If << Manual >> is displayed,
the
Rec button must be clicked to start recording.
7. Control buttons for the record channel are shown here:
Cue places the system in record standby mode.
With Cue, the system starts recording nearly instantaneously when
Rec is clicked or the Start Time is reached. Otherwise, there is an
up to five second delay before recording begins.
Record begins recording the video input stream.
Stop stops recording the video input stream on the record channel,
and stops playback on all of the channels using the record channel.
Pause pauses the record channel without affecting the current
playback operation of the associated playback channels.
Click on
Pause to toggle it off and resume recording.
NOTE: If the record channel is paused longer than the delay time for
the playback channel, the playback channel can catch up or even
pass the recorder. If there is material stored in the clip it could be
replayed.
System Pause pauses all channels on the system. Click on System
Pause to resume panel operations.