Grass Valley Profile XP Aug 16 2004 - Manual (Page 207)

Adjusting analog audio input level
23 July 2004 Profile XP System Guide 207
Adjusting analog audio input level
You can use the analog input gain adjustment to correct the analog audio input signal
level. For instance, you can use the input gain adjustment to correct input audio level
before recording the source signal.
To adjust analog audio input level:
1. Select Analog Audio Input in the Configuration Manager window.
2. Select an audio input in the list to adjust or click Select All to adjust all inputs.
3. Use the slider in the Analog Audio Input dialog box to adjust input level.
Overload clipping indicates the audio level is greater than +23dbu.
4. Click Finish .