Grass Valley Profile XP Aug 16 2004 - Manual (Page 95)

Checking RAID controller microcode version
23 July 2004 Profile XP System Guide 95
Checking RAID controller microcode version
To determine RAID controller microcode version:
1. Start GVG Disk Utility, then select a controller node in the tree view.
NOTE: Redundant controllers, which share the same set of disks, are displayed in
GVG Disk Utility as a single controller, and the microcode version is reported for
the pair.
2. The controller microcode version is displayed in the right-hand pane.
To upgrade microcode, refer to “Loading RAID controller microcode: All models”
on page 96.