Selecting analog audio output line mode – Grass Valley Profile XP Aug 16 2004 User Manual
Page 210
Advertising
Chapter 6 Modifying a Channel: Audio Settings
210
Profile XP System Guide
23 July 2004
Selecting analog audio output line mode
You can select single ended or balanced line modes for the analog audio outputs.
To select analog audio line mode:
1. Select Audio Output in the Configuration Manager window.
2. Select an audio output in the list, or click
Select All
.
3. Select the Line Mode using the
Line Mode
drop-down list.
4. Click
Finish
to save your settings.
Advertising
This manual is related to the following products: