Grass Valley Profile XP Aug 16 2004 - Manual (Page 226)

Chapter 7 Modifying a Channel: Timecode Settings
226 Profile XP System Guide 23 July 2004
4. Select SDI-VITC-Out in the Timecode Output list.
NOTE: The video outputs listed in the Timecode Output list correspond to those
assigned to the channel. For example, SDI-VITC-OutA-J7 is listed in the following
figure because SDI-OutA-J7 is selected as the video output for the channel. If you
change the video output for a channel, the Timecode Output list also changes.
5. Click Finish to save your settings and close the Channel Configuration dialog box.