SMA SUNNY HOME MANAGER User Manual
Page 100
12 System Settings
SMA Solar Technology AG
100
HoMan_Portal-BA-en-17
User Manual
10. To save an image in the gallery, upload the image to the gallery as follows:
• Select [Select from the gallery].
• Select Upload.
• Select [Browse].
• Select the desired image from one of your directories.
• Select [Upload selected file].
• Select .
☑ The image is saved in the gallery.
11. To upload an image from the gallery as the system image, select [Select from the gallery].
12. Double-click the desired image.
13. Select [Save].
Deleting the User-Defined System Image
If you delete the user-defined system image, Sunny Portal will display the default system image.
Procedure:
1. Select Configuration > PV system properties in the page and menu selection.
2. Select the tab PV system data.
3. Select [Edit].
☑ The menu for setting PV system data opens.
4. Select [No PV system image] in the area PV system image.
5. Select [Save].
12.8 Entering the Feed-in Tariff, Self-Consumption Tariff and
Electricity Tariff
The values entered for the feed-in tariff, self-consumption tariff and electricity tariff affect the following
components:
• Recommended actions in the diagram Forecast and recommended action on the Current
status and forecast page
• Load control via the Sunny Home Manager (either directly via cable-based communication or
indirectly via SMA radio-controlled sockets)
Requirement:
☐ You must have the user role Installer or PV system administrator (see Section 13.1 "Users