SMA SUNNY HOME MANAGER - Manual (Page 67)

SMA Solar Technology AG 9 Load Control
User Manual HoMan_Portal-BA-en-17 67
9.3.4 Selecting the Load Type
The settings that are possible for the load depend on which load type you select.
Procedure:
1. Call up the load properties (see Section 9.3.1, page 65).
2. Select [Edit].
3. In the drop-down list Load type, select the desired load type:
Type of load Explanation
Self-configured You configure the connected load individually.
With this type of load, you must also state whether
the load is program-controlled or if its operation
can be interrupted at any time (see Section 9.3.5).
Example of program-controlled load: dryer
Example of load where operation can be
interrupted: pond pump
Dishwasher The connected load is a dishwasher.
Washing machine The connected load is a washing machine.
Energy monitoring (measuring only) Only the power consumption of the connected load
is to be measured.
Stiebel Eltron WWK 300 The connected load is the Stiebel Eltron WWK 300
heat pump.
Some settings are not visible because they were set
by the manufacturer to predefined values
specifically for this device, and therefore cannot be
changed.
Tecalor TTA 300 The connected load is the Tecalor TTA 300 heat
pump.
Some settings are not visible because they were set
by the manufacturer to predefined values
specifically for this device, and therefore cannot be
changed.
Heating element The load connected is a heating element.