SMA SUNNY HOME MANAGER - Manual (Page 45)

SMA Solar Technology AG 6 Page and Menu Selection
User Manual HoMan_Portal-BA-en-17 45
6.4 Performance Ratio
Requirements for displaying the page:
☐ A Sunny SensorBox must be installed in your Sunny Home Manager system. The Sunny
SensorBox measures the solar irradiation values at the installation site of the PV modules and
makes this information available to the Sunny Home Manager.
The performance ratio is a measure of the quality of a PV system that is independent of location
(for information on the performance ratio, see Technical Information "Performance Ratio - Quality
Factor for the PV System" at www.SMA-Solar.com).
This page displays the following PV system data:
• Mean values of the performance ratio for the days of a month
• Mean values of the performance ratio for the months of a year
6.5 Report
6.5.1 Daily PV System Report
This page displays the following inverter data:
• Table with daily yield, monthly yield, annual yield
• Diagram with the development of the meter reading over the hours of a day
This page can be sent along with a Daily info report (see Section 11.3.2 "Configuring Reports",
page 90).
6.5.2 Monthly PV System Report
This page displays the following inverter data:
• Table with monthly yield and annual yield
• Diagram with the development of the meter reading over the days of a month
The page can be sent along with a Monthly info report (see Section 11.3.2 "Configuring Reports",
page 90).
6.6 Devices
A page with the respective inverter data for each inverter is displayed under the menu item Devices:
• Diagram with the development of the meter reading over the months of a year
• Diagram with the mean power value for one day in hours
6.7 Sensors
The following is required to display the menu item:
☐ A Sunny SensorBox must be installed in your Sunny Home Manager system.
A page with the measured values of the respective Sunny SensorBox is displayed for each
Sunny SensorBox under the menu item Sensors.