Yaskawa i80M Maintenance Manual User Manual
Page 175
Advertising
(c) Return the settings of
and SW2 on the module
to those made before the replacement.
(d) Check visually that the fuse is not blown.
(e)
the module in line with the guide of the NC
rack and tighten mounting screw.
(f)
the CN26,
and
cables into
the original position.
(3)
Checking Functions After Replacement
(a)
Check that+5V,
and
outputs are not
shorted due to overloading.
(b) Apply the first power and second power again and
check that no alarm occurs.
167
Advertising