Yaskawa i80M Maintenance Manual - Manual (Page 68)

2.3 CONTROL PANEL
This section explains standard
cabinet. For cabinets customized for customers,
refer to the manual issued by machine
manufacturer.
(1) Checks for Tight Closing
of Doors (daily)
( a )
( b )
The control panal is con-
structed as a dust-proof,
sheet-steel enclosure with
gasketed doors so as to
keep out dust and oil mists.
Keep each door tightly
closed at all times.
o
After inspecting the con-
trol with the door open,
close the door and fasten
door locks (two per door)
securely using the key
o
provided (No. .
D O O R
When opening or closing,
insert the key all the way
into the keyhole and turn
until it clicks (approximately
a quarter-turn) .
The key
can be removed from an
open or closed position.
OPEN POSITION
CLOSED
OPEN POSITION
Left - Hand Hinged Door Right-Hand Hinged
Movable part “a “ is notched horizontally, . . . . . .
Movable part “a “ is notched vertically. . . . . . .
60
If the optional door interlocking switch is
provided, opening the door shuts off the
main power supply and stops all operations.
Fig. 2.2 Door Lock