Yaskawa i80M Maintenance Manual - Manual (Page 70)

I
2.4 S E R V O M O T O R
Vibration and Noise
or as required)
(daily
Bv hand
Vibration can be checked
by resting the hand on the --
motor, and for noise, using
a listening stick is
mended.
If any
t y is found, contact main-
tenance personnel immediate-
ly .
(2) Motor Contamination and
Damage (daily or as required)
Checking visually for
c o n t a m i n a t i o n a n d d a m a g e
Check the motor exterior
visually. If dirt or damage
should be observed, inspect
the motor by removing the
machine cover.
Refer to the
machine manufacturer’s manual.
62