Yaskawa G7 Modbus Communication - Manual (Page 86)

86
Table 5.1 User Parameter Settings
Parameter Description Default User Setting Notes
E1-03 V/F Pattern Selection 0fh
E1-04 Maximum Frequency 60.0 Hz
E1-05 Maximum Voltage kVA Dep.
E1-06 Base Frequency 60.0 Hz
E1-07 Midpoint Frequency A Control Meth
E1-08 Midpoint Voltage A Control Meth
E1-09 Minimum Frequency Control Meth
E1-10 Minimum Voltage Control Meth
E1-11 Midpoint Frequency B 0.0 Hz
E1-12 Midpoint Voltage B 0.0 VAC
E1-13 Base Voltage 0.0 VAC
E2-01 Motor Rated FLA kVA Dep.
E2-02 Motor Rated Slip kVA Dep.
E2-03 No-Load Current kVA Dep.
E2-04 Number of Poles 4
E2-05 Terminal Resistance kVA Dep.
E2-06 Leakage Inductance kVA Dep.
E2-07 Saturation Compensation 1 0.50
E2-08 Saturation Compensation 2 0.75
E2-09 Mechanical Loss 0.00 %
E2-10 Motor Iron Loss kVA Dep.
E2-11 Motor Rated Power kVA Dep.
E2-12 Saturation Compensation 3 1.30
E3-01 Control Method (Motor 2) 2
E3-02 Maximum Frequency (Motor 2) 60.0 Hz
E3-03 Maximum Voltage (Motor 2) kVA Dep.
E3-04 Base Frequency (Motor 2) 60.0 Hz
E3-05 Midpoint Frequency (Motor 2) Control Meth
E3-06 Midpoint Voltage (Motor 2) Control Meth
E3-07 Minimum Frequency (Motor 2) Control Meth
E3-08 Minimum Voltage (Motor 2) Control Meth
E4-01 Motor Rated FLA (Motor 2) kVA Dep.
E4-02 Motor Rated Slip (Motor 2) kVA Dep.
E4-03 No-Load Current (Motor 2) kVA Dep.
E4-04 Number of Poles (Motor 2) 4
E4-05 Terminal Resistance (Motor 2) kVA Dep.
E4-06 Leakage Inductance (Motor 2) kVA Dep.
E4-07 Motor Rated Power (Motor 2) kVA Dep.
E4-08 Slip Comp Gain (Motor 2) Control Meth
E4-09 ASR P Gain (Motor 2) Control Meth
E4-10 ASR I Time (Motor 2) Control Meth
E4-11 Torque Comp Gain (Motor 2) Control Meth
F1-01 PG Pulses/Revolution 1024 Pulses
F1-02 PG Feedback Loss Selection 1
F1-03 PG Overspeed Selection 1
F1-04 PG Deviation Selection 3
F1-05 PG Rotation Selection 0
F1-06 PG Output Ratio 1
F1-07 PG Ramp PI/I Selection 0
F1-08 PG Overspeed Level 115 %
F1-09 PG Overspeed Time 1.0 Sec
F1-10 PG Deviation Level 10 %
F1-11 PG Deviation Time 0.5 Sec
F1-12 PG Gear Teeth 1 0
F1-13 PG Gear Teeth 2 0
F1-14 PG Loss Detection Time 2.0 Sec
F1-21 PG Pulses/Revolution (Motor 2) 1024
F1-22 PG Rotation Selection (Motor 2) 0
F1-23 PG Gear Teeth 1 (Motor 2) 0