TA Triumph-Adler DCC 2930 - Manual (Page 190)

Copying Functions
4-34
EcoPrint
Use EcoPrint to save toner when printing. Use this function for test copies or any other occasion where high
quality print is unnecessary.
The procedure for making copies using EcoPrint is explained below.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press [Color/Image Quality] and then [EcoPrint].
4 Press [On].
5 Press [1] to [5] (Low - High) to adjust the Toner
Save Level.
6 Press [OK].
7 Press the Start key to start copying.
Single Color
Specify one of Cyan, Magenta, Yellow, Red, Green, or Blue, and produce copies with that color regardless of
original type.
Follow the steps shown below for Single Color Copy.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press [Color/Image Quality], [Color Selection] and
then press [Single Color].
4 Select color for copying from [Cyan], [Magenta],
[Yellow], [Red], [Green] or [Blue].
5 Press [OK].
6 Press the Start key. Copying begins.
Status
Copies
Cancel OK
EcoPrint
Off
Toner Save Level
On
Add Shortcut
10/10/2010 10:10
Low High
1 2 3 4 5
100%
A4
A4
Preview
Original
Zoom
Paper
:
:
:
Color Selection
Copies
Status
Cancel OK Add Shortcut
Auto Color
Single Color
Black &
White
Full Color
Cyan Yellow Magenta
Red Blue Green
Single Color
10/10/2010 10:10
100%
A4
A4
Preview
Original
Zoom
Paper
:
:
: