File name entry, File name entry -28, Age 6-28) – TA Triumph-Adler DCC 2930 User Manual
Page 248: E 6-28
Sending Functions
6-28
File Name Entry
This setting allows you to assign a document name to scanned images. A job number and the date and time can
be added. You can specify a default for the document name.
Use the procedure below to assign names to scanned documents that you are sending.
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [File Name
Entry].
4
Press [File Name].
5
Enter the document name, and press [OK].
NOTE:
Up to 32 characters can be entered for the
document name.
6
Press [Job No.] to enter the job No., and [Date and
Time] to enter the date and time.
7
Press [OK].
8
Specify the destination, and press the Start key to
start sending.
Add a file name.
Additional information such as Job No.
and Date and Time can also be set.
File Name Entry
File Name
doc
Additional Info
Job No.
Date and Time
[
]
Date and Time
Cancel
OK
Add Shortcut
Status
Destination
10/10/2010 10:10