TA Triumph-Adler DCC 2930 - Manual (Page 479)

Troubleshooting
12-3
12
Printouts are too dark. Have you changed the
density? Select appropriate density level. 3-10
9-69
— Run [Calibration]. 9-75
— Run [Developer Refresh]. 9-76
Copies have a moire
pattern (dots grouped
together in patterns
and not aligned
uniformly). Is the original a printed
photograph? Set the image quality to [Printer
Output] or [Book/Magazine] in
[Photo]. 3-10
Printouts are not
clear. Did you choose appropriate
image quality for the original? Select appropriate image quality. 3-10
Dirt on the print side
of the paper. Is the platen or the document
processor dirty? Clean the platen or the document
processor. 11-15
— Brush the transfer roller clean. 11-19
— Run [Drum Refresh]. 9-70
— Run [Developer Refresh]. 9-76
— Run [Laser Scanner Cleaning]. 9-76
Printouts are fuzzy. Is the machine being used in
very humid conditions? Use in an environment that has
suitable humidity. —
— Run [Drum Refresh]. 9-70
Images are skewed. Are the originals placed
correctly? When placing originals on the
platen, align them with the original
size indicator plates. 2-46
When placing originals in the
optional document processor, align
the original width guides securely
before placing the originals. 2-46
Is the paper loaded
correctly? Check the position of the paper
width guides. 2-29
Symptom Checkpoints Corrective Actions
Reference
Page