Color selection, Color selection -23, E 6-23) – TA Triumph-Adler DCC 2930 User Manual
Page 243: Ge 6-23), E 6-23
Sending Functions
6-23
6
Color Selection
This feature allows you to select the color mode used for scanning when sending images. You can select from
Auto Color (Color/Gray), Auto Color (Color/B & W), Full Color, Grayscale or Black & White.
Use the procedure below to select the color mode when sending scanned images.
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then [Color
Selection].
4
Select the color mode to be used for scanning.
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
Black & White
Grayscale
Color Selection
Full Color
Select scanning color.
Use [Auto Color] to automatically produce color originals
in full color and black & white originals in black & white.
Cancel
OK
Add Shortcut
Status
Destination
Auto Color
(Color/B & W)
Auto Color
(Color/Gray)
100%
A4
A4
Preview
Original
Zoom
Send
:
:
:
10/10/2010 10:10