Ge 9-22, Ge 9-22) – TA Triumph-Adler DCC 2930 User Manual
Page 328
Default Setting (System Menu)
9-22
Use the procedure below to select the default Prevent Bleed-thru (Copy).
1
Press the System Menu key.
2
Press [Common Settings], [
], [Next] of Function Defaults, [
] and then [Change] of Prevent Bleed-thru
(Copy).
3
Set the default Prevent Bleed-thru (Copy).
4
Press [OK].
Prevent Bleed(Send/Store)
Set the default Prevent Bleed(Send/Store).
Use the procedure below to select the default Prevent Bleed(Send/Store).
1
Press the System Menu key.
2
Press [Common Settings], [
], [Next] of Function Defaults, [
] and then [Change] of Prevent Bleed(Send/
Store).
3
Set the default Prevent Bleed(Send/Store).
4
Press [OK].
Zoom
Select the enlarged/reduced default settings when paper size/sending size is changed after the originals are set.
The available default settings are shown below.
Use the procedure below to select the default zoom setting.
1
Press the System Menu key.
2
Press [Common Settings], [
], [Next] of Function Defaults, [
] three times and then [Change] of Zoom.
3
Select the default zoom setting.
4
Press [OK].
Item Description
Off
Do not reduce show-through.
On
Reduce show-through.
Item Description
100%
Copy (send/save) at actual size (100%).
Auto
Automatically reduce or enlarge the originals to match the paper
size/ sending size.