TA Triumph-Adler DCC 2930 - Manual (Page 488)

Troubleshooting
12-12
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Error Message Checkpoints Corrective Actions
Reference
Page
Hard Disk error. — An error has occurred on the hard
disk. Job is canceled. Press [End].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been
exceeded. Restart the system or
turn the power OFF/ON. If the
error still occurs, divide the file
into smaller files. If the error
occurs after the file is divided, the
hard disk is damaged. Execute
[System Initialization].
04: Insufficient space on the hard
disk to complete this operation.
Move data or delete unneeded
data.
—
Incorrect account ID. — The account ID was incorrect when
processing the job externally. The job
is canceled. Press [End]. —
Incorrect box
password. — The box password was incorrect
when processing the job externally.
The job is canceled. Press [End]. —
Incorrect Login User
Name or Password. — The login user name or password
was incorrect when processing the
job externally. The job is canceled.
Press [End]. —
Incorrect password. Is an incorrect password
entered? Enter the correct password. ―
Install the punch
waste box. — Follow the instructions on the touch
panel and install the punch waste
box. —
Job separator tray is
full of paper. Is the acceptable storage
capacity exceeded? Remove the paper and press
[Continue]. Printing then resumes. —
Job Accounting
restriction exceeded.* Is the acceptable printing
count restricted by Job
Accounting exceeded? The printing count exceeded the
acceptable count restricted by Job
Accounting. Cannot print any more.
This job is canceled. Press [End]. —