TA Triumph-Adler DCC 2930 - Manual (Page 332)

Default Setting (System Menu)
9-26
Color TIFF Compression
Select the compression method for TIFF images handled on this machine. Use the procedure below to set the
default Color TIFF Compression setting.
1 Press the System Menu key.
2 Press [Common Settings], [ ] and [Next] of Function Defaults. Press [ ] twice and then [Change] of Color
TIFF Compression.
3 Select [TIFF V6] or [TTN2].
4 Press [OK].
Image Quality (File Format)
Select the default PDF/TIFF/JPEG/XPS file quality. Five options are available from 1 Low Quality (High Comp.)
to 5 High Quality (Low Comp.).
NOTE: Higher quality will make the stored files larger.
Refer to page 6-14 for file formats.
Use the procedure below to select the default file quality setting.
1 Press the System Menu key.
2 Press [Common Settings], [ ] and [Next] of Function Defaults. Press [ ] twice and then [Change] of
Image Quality (File Format).
3 Select the default image quality from [1] (Low Quality) to [5] (High Quality).
4 Press [OK].
Collate/Offset
Set the defaults for Collate/Offset. The table below shows the available settings.
NOTE: Refer to page 3-15 for Collate/Offset.
Item Description
Collate Off Collate not performed.
On Collate performed.
Offset Off Offset not performed.
Each Set
(Each Page) Offset performed. (If [Off] is selected of Collate, it is
performed [Each Page].)