TA Triumph-Adler DCC 2930 - Manual (Page 484)

Troubleshooting
12-8
Responding when Error Messages
If the touch panel displays any of these messages, follow the corresponding procedure.
Alphanumeric
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Error Message Checkpoints Corrective Actions
Reference
Page
Acceptable fold count
exceeded. Is the acceptable number of
sheets exceeded? Press [Continue] to print using Fold
per acceptable number of sheets.
Press [Cancel] to cancel the job. 4-11
Acceptable staple
count exceeded.* Is the acceptable number of
sheets exceeded? Press [Continue] to print without
using Staple. Press [Cancel] to
cancel the job. —
Activation error. — Failed to activate the application.
Contact administrator. —
— Expansion Authentication is disabled.
Turn the main power switch off and
on. If the error exists, contact
administrator. —
Add paper in cassette
#. Is the indicated cassette out
of paper? Load paper.
Select the available paper. Press
[Continue] to print. 2-27
Add paper in Multi
Purpose tray. Is the paper of the selected
size loaded in the multi
purpose tray? Load paper.
Select the available paper. Press
[Continue] to print. 2-32
Box is not found. — The specified box cannot be found.
Job is canceled. Press [End]. —
Box limit exceeded.* — Document box is full, and no further
storage is available. Job is canceled.
Press [End]. —
— Repeat Copy box is full, and no
further repeat copy is available.
Press [Continue] to print scanned
pages.
Press [Cancel] to cancel the job. —
Cannot connect to
Authentication
Server.* — Set machine time to match the
server’s time. 2-12
— Check the domain name. 10-2
— Check the host name. 10-2
— Check the connection status with the
server. —