TA Triumph-Adler DCC 2930 - Manual (Page 544)

Appendix-8
FAX Kit
By installing the FAX kit, fax send/receive is enabled. Also, it is possible to use it as a network fax, by using it
with a computer. When two FAX kits are installed, the units can be connected to two different telephone lines
which will enable quicker message transmission to a number of recipients. If one of the lines is dedicated to
receiving, the busy line time can be reduced. For further details, refer to Fax System (V) Operation Guide.
Expansion Memory
Image storage memory (128 MB) that allows the machine to receive more pages of incoming faxed originals.
Expansion memory should only be installed or removed by the service representative.
Gigabit Ethernet Board
The Gigabit Ethernet Board provides a high-speed connection for the Gigabit-per-second interface. Since the
kit was designed to work with TCP/IP, NetWare, NetBEUI, and AppleTalk protocols, in the same way as the main
unit, it fulfills the network printing demands on Windows, Macintosh, and UNIX environments. This expansion
kit is also compatible with ThinPrint.
Internet FAX Kit (A)
Installing the Internet FAX Kit (A) sends and receives faxes via the Internet without using a phone line. It can
only be added when the FAX Kit is installed.
Data Security Kit
The Data Security Kit overwrites all unnecessary data in the storage area of the hard disk so that it cannot be
retrieved. The Data Security Kit encrypts data before storing it in the hard disk. It guarantees higher security
because no data cannot be decoded by ordinary output or operations.
Printed Document Guard Kit
This prevents the unauthorized copying and/or transmission of documents that contain important confidential or
personal information. When a document is printed from a computer, this feature imprints a special pattern on
the document. When anyone attempts to copy or send that document on this machine, the machine detects the
pattern and protects the information by printing the document in blank and prohibiting transmission.
Emulation Option
Enables emulation whereby the machine operates using commands for other printers. Installing this option
enables IBM Proprinter, DIABLO 630, and EPSON LQ-850 emulation.
USB Keyboard
A USB keyboard can be used to enter information into the text fields on the operation panel. A special mount is
also available to install the keyboard on the MFP. Please contact your dealer or service representative for
information on keyboards that are compatible with your MFP before you purchase one.
Document Table
Place original or other documents when using the machine. It has a drawer to accommodate clips.