TA Triumph-Adler P-4035 MFP - Manual (Page 114)

5-36
Using Convenient Fax Functions > Using a Connected Telephone
Using a Connected Telephone
It is possible to connect a telephone (a commercially available item) to this machine and use various functions.
FAX/TEL Auto Switch Reception
This reception method is convenient when using both telephone and fax on a single telephone line. When fax originals
have been sent, the machine automatically receives them, and when the other party is calling from a telephone, the
machine makes a ringing tone urging the user to respond.
Flow of reception
Preparation:
Refer to RX Settings on page 8-6 to select [Auto(FAX/TEL)].
IMPORTANT
In order to use FAX/TEL Auto Switch Reception, it is necessary to connect a
telephone set (commercially available product) to the machine.
After the telephone has made a ringing tone for the preset number of times, the other
party is required to pay phone line charges even if the receiving system does not
respond.
FAX Telephone
When the other party has sent originals with
automatic send
When the other party is calling from a
telephone
Receives incoming call without making ringing tone.
(The other party is required to pay the phone line charge from this point.)
Makes ringing tone twice.
(Only the other party can hear the ringing tone.)
Receive originals from the other party
automatically (FAX Automatic Reception)
Makes ringing tone. (Both the other party and
the receiving machine can hear the ringing
tone.)
(If you do not lift the handset within 30
seconds, the machine switches to fax
reception.)
When you lift the handset of the connected
telephone set, you can talk to the other party.