TA Triumph-Adler P-4035 MFP - Manual (Page 180)

8-16
Fax Settings > Transmission Restriction
Setting Reception Restriction
Restrict incoming faxes so that you only receive originals from senders registered in Permit FAX No. and Permit ID No.
and senders registered in your Address Book. This mode also allows you to set a [Reject List] for Reception Restriction
so that reception from senders on the list of Rejected FAX numbers or from senders whose Local FAX Number is not
registered are rejected.
(You can select whether reception from a party whose local fax number is not registered is allowed or rejected in
Unknown Number Reception on page 8-16 .) To change the reception restriction, follow the steps below.
1
Display the screen.
1 Press the [ System Menu/Counter ] key.
2 Press the [ ▲ ] or [ ▼ ] key to select [FAX].
3 Press the [ OK ] key.
4 Press the [ ▲ ] or [ ▼ ] key to select [TX/RX Restrict.].
5 Press the [ OK ] key.
6 Press the [ ▲ ] or [ ▼ ] key to select [RX Restriction].
7 Press the [ OK ] key.
2
Configure the function.
1 Press the [ ▲ ] or [ ▼ ] key to select [Permit+Addr Book], [Reject List] or [Off].
2 Press the [ OK ] key.
To restrict the other parties from which you receive originals only to the ones registered in
Permit FAX No. and Permit ID No. as well as the ones registered in the Address Book, press
[Permit+Addr Book]. To block incoming faxes from senders registered in Reject FAX No.,
press [Reject List].
Unknown Number Reception
Select whether to receive the fax of that the number is unknown when [Reject List] is set for Reception Restriction. To
change the reception restriction for the unknown fax number, follow the steps below.
1
Display the screen.
1 Press the [ System Menu/Counter ] key.
2 Press the [ ▲ ] or [ ▼ ] key to select [FAX].
3 Press the [ OK ] key.
4 Press the [ ▲ ] or [ ▼ ] key to select [TX/RX Restrict.].