TA Triumph-Adler P-4035 MFP - Manual (Page 51)

3-12
Sending Faxes > Methods For Entering the Destination
Methods For Entering the Destination
Entering the destination fax number with the numeric keys
The procedure for entering the destination fax number with the numeric keys is explained below.
1
Press the [ FAX ] key.
2
Enter the fax number of the receiving system using the numeric keys.
Up to 64 digits can be entered as the fax number of the receiving system.
Pressing the [ Address Recall/Pause ] key adds about three seconds of waiting time during
dialing. For example, when dialing the receiving system on an external line, you can use this
method to insert a pause before resuming dialing after you dial a specific number.
3
Select transmission settings.
Sub address communication, encrypted transmission, transmission start speed and ECM can
be set.
1 Press [Detail].
2 Press the [  ] or [  ] key to select the item to change the settings for and then press [Edit]
or [Change].
NOTE
If Dest. Entry(FAX) on page 8-7 is set to [Prohibit], it is not possible to directly enter a fax number. Select the
destination from the Address Book or the One Touch Keys.
FAX No. Entry:
Chain Detail
0123456789
FAX No. Entry:
Detail
0123456789
FAX Detail:
1/ 6 Sub Address:
Edit
1234567890