TA Triumph-Adler P-4035 MFP - Manual (Page 25)

2-12
Before Using the Fax Machine > Local FAX Information Entry
TX Start Speed
Set the TX Start Speed. When communication conditions are bad, the fax may not be transmitted correctly. In that case,
set a lower TX Start Speed.
1
Display the screen.
1 Press the [ System Menu/Counter ] key.
2 Press the [ ▲ ] or [ ▼ ] key to select [FAX].
3 Press the [ OK ] key.
4 Press the [ ▲ ] or [ ▼ ] key to select [Transmission].
5 Press the [ OK ] key.
6 Press the [ ▲ ] or [ ▼ ] key to select [TX Start Speed].
7 Press the [ OK ] key.
2
Configure the settings.
1 Press [ ▲ ] or [ ▼ ] to select [9600bps], [14400bps] or [33600bps].
2 Press the [ OK ] key.
NOTE
Normally this should be used with the default setting.
TX Start Speed:
9600bps 01
14400bps 02
33600bps 03 *