Manual reception, Manual reception -42 – TA Triumph-Adler P-4035 MFP User Manual
Page 120
5-42
Using Convenient Fax Functions > Using a Connected Telephone
5
Press the [
Start
] key.
Transmission begins.
6
Replace the handset.
When sending starts, return the handset to its original position.
Manual Reception
Reception is possible after confirming that the telephone line has connected to the sending party.
1
The telephone rings.
When there is an incoming call, the telephone connected to the machine makes a ringing tone.
2
Lift the handset.
Lift the handset of the telephone.
3
Check if the telephone line has connected to the fax of the sending
system.
If the destination is a fax machine, you will hear soft beep sounds. If a person answers, you
can talk to that person.
4
Press the [
On hook
] key.
1
Press the [
FAX
] key.
2
Press the [
On hook
] key.
NOTE
FAX Automatic Reception has been preset for the receiving mode of this machine. To use
Manual Reception, you need to change the receiving mode to Manual Reception. To change
to manual mode, refer to
.