Fax resolution, Orig.orientation, Continuous scan – TA Triumph-Adler P-4035 MFP User Manual
Page 60: File name entry, Jobfinish notice
3-21
Sending Faxes > FAX Resolution
FAX Resolution
Select fineness of images when sending FAX. The larger the number, the better the image resolution. However, better
resolution also means larger file sizes and longer send times.
Orig.Orientation
To scan the original in the correct orientation, specify which side of the original is the top. To set a 2-sided original, the
orientation of the placed original must be set.
Continuous Scan
Scan a large number of originals in separate batches and then produce as one job. Originals will be scanned
continuously until you press [End Scan].
File Name Entry
Adds a file name. Additional information such as job number and date can also be set.
JobFinish Notice
Send e-mail notice when a job is complete.
Item
Description
200x100dpi Norm.(Normal)
when sending originals with standard size
characters
Typical character size: 10.5 point
(example:
Resolution Resolution
)
200x200dpi Fine(Fine)
when sending originals
with relatively small characters and thin lines
Typical character size: 8 point
(example:
Resolution Resolution
)
200x400dpi S.Fin(Super Fine)
when sending originals with minute characters and
lines
Typical character size: 6 point
(example:
Resolution Resolution
)
400X400dpi U.Fin(Ultra Fine)
when sending originals with minute characters and
lines more finely
Typical character size: 6 point
(example:
Resolution Resolution
)
NOTE
The default setting is [200x100dpi Norm.]. The higher the resolution, the clearer the image, but the fax transmission
time is longer.
For details, refer to the machine’s Operation Guide.
For details, refer to the machine’s Operation Guide.
It is possible to attach an image to the Job Finish Notice.
For details, refer to
.