TA Triumph-Adler P-4035 MFP - Manual (Page 121)

5-43
Using Convenient Fax Functions > Using a Connected Telephone
5
Press [ManualRX].
Reception will start.
6
Replace the handset.
When reception starts, return the handset to its original position.
Remote Switch Function
You can start fax reception by operation from the connected telephone set. This function is convenient for using this
machine and a telephone set (commercially available product) in combination installed at places distant from each other.
Using the Remote Switch Dial
To start fax reception by operation from the connected telephone set, use the following
operation.
NOTE
When using a telephone set that can send tone signals, use the telephone to start the
reception of originals with the remote switch function. (Refer to
Remote Switch Function on
page 5-43 .)
NOTE
In order to use remote switch, it is necessary to connect the tone signal-sending telephone
set (commercially available product) to the machine. However, even if it is a tone signal-
sending telephone set, this function may not be used satisfactorily depending on the type of
telephone set. For details, contact our agent or the store where you purchased this
machine.
The remote switch dial is set to 55 at the factory.
The remote switch dial number can be changed. Refer to Reception on page 8-6 .
On Hook:
ManualRX