Low power timer …8-149 – TA Triumph-Adler P-C2660 MFP User Manual
Page 405
Default Setting (System Menu)
8-149
8
Low Power Timer
The time until the machine enters low power mode can be set. The range that can be set is as follows.
Use the procedure below to set the Low Power Timer. The default setting is 1 minute.
1
In the Sys. Menu/Count. menu, press the or
key to select [Common Settings].
2
Press the OK key. The Common Settings menu
appears.
3
Press the or key to select [Timer Setting], and
press the OK key.
A login screen will appear. Then, enter the user ID
and password with administrator privileges to log
in, and press [Login] (the Right Select key).
4
The Timer Settings menu appears.
5
Press the or key to select [Low Power Timer].
Value
For Europe
30 ppm model: 1 to 60 minutes (1minute increments)
35 ppm model: 1 to 120 minutes (1minute increments)
Except for Europe
1 to 240 minutes (1minute increments)
Sys. Menu/Count.:a b
4 User/Job Account
5 User Property
*********************
[ Exit
]
6 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit
]
1 Language
Login User Name: L
b
*******************
Login Password:
[ Login
]
Timer Setting:
a b
*********************
2 PanelReset Timer
3 Low Power Timer
[ Exit
]
1 Auto Panel Reset