TA Triumph-Adler P-C2660 MFP - Manual (Page 94)

Preparation before Use
2-52
3 Adjust the position of the paper width guides on the
Multi Purpose tray. Standard paper sizes are
marked on the Multi Purpose tray. For standard
paper sizes, slide the paper width guides to the
corresponding mark.
4 Align the paper with the paper guides and insert as
far as it will go.
IMPORTANT: Keep the side that was closest the
package seal facing up.
Curled paper must be uncurled before use.
Straighten the top edge if it is curled.
When loading paper into the multi purpose tray, check
that there is no paper left over in the tray from a
previous job before loading the paper. If there is just a
small amount of paper left over in the multi purpose tray
and you want to add more, first remove the left-over
paper from the tray and include it with the new paper
before loading the paper back into the tray.

