TA Triumph-Adler P-C2660 MFP - Manual (Page 476)

Maintenance
9-4
Toner Container Replacement
When the message display displays Add toner, replace the toner.
Every time you replace the toner container, be sure to clean the parts as instructed below. For details, refer to
Cleaning the paper transfer unit on page 9-3.
CAUTION: Do not attempt to incinerate the toner container or the waste toner box. Dangerous sparks may
cause burns.
Toner Container Replacement
1 While pulling the top cover lever, open the top tray.
CAUTION: To prevent toppling, the top tray and
document processor cannot be opened at the same
time.
Open the top tray to the position shown. If the tray
is not opened to this position, it will not be possible
to install the toner container.
2 Carefully remove the old toner container from the
machine.
NOTE: Put the old toner container in the plastic bag
(supplied with the new toner kit) and discard it later
according to the local code or regulations for waste
disposal.
3 Take the new toner container out of the toner kit.
Shake the new toner container at least 5 or 6 times
as shown in the figure in order to distribute the
toner evenly inside the container.