Adding a group – TA Triumph-Adler P-C2660 MFP User Manual
Page 420
Default Setting (System Menu)
8-164
Adding a Group
Compile two or more individuals into a group. Designations in the group can be added at the same time. When
adding a group, a maximum of 50 groups can be added in the Address Book.
NOTE:
If user login administration is enabled, you can only edit destinations in the Address Book by logging
in with administrator privileges.
Before adding a group in the Address Book, the individuals to be included in the group must be added first.Up
to 100 destinations can be added as the addresses. Among them, 5 destinations can be assigned for a FTP or
SMB address. The available addresses will then be 95 in total for email and/or fax addresses.
Use the procedure below to register a group.
1
In the Sys. Menu/Count. menu, press the or
key to select [Edit Destination].
2
Press the OK key. The Edit Destination menu
appears.
3
Press the or key to select [Address Book].
4
Press the OK key. The Address Book list screen
appears.
5
Press [Menu] (the Right Select key). Menu
appears.
6
Press the or key to select [Add Address].
Sys. Menu/Count.:a b
; Document Box
*********************
= Adjust/Maint.
[ Exit
]
< Edit Destination
Edit Destination:a b
*********************
2 Print List
[ Exit
]
1 Addressbook
Addressbook:
a b
*********************
l Fiala
l Maury
[ Menu
]
k Design
Menu:
a b
1 Detail/Edit
2 Delete
*********************
3 Add Address