Network security, Ssl setting, Network security -185 – TA Triumph-Adler P-C2660 MFP User Manual
Page 441
Default Setting (System Menu)
8-185
8
Network Security
The network security functions can be set up to protect printer operation and the print data.
The following network security settings are available.
• SSL Setting …8-185
• SNMPv3 Setting …8-193
• IPSec Setting …8-194
SSL Setting
This allows you to use SSL network security for communication. You can use SSL Setup to select whether or
not SSL is used and to specify the IPP port and HTTP port security settings.
SSL
Make this setting Make this setting when you use SSL. The default setting is On.
Use the procedure below to make the setting.
1
In the Sys. Menu/Count. menu, press the or
key to select [System/Network], and press the OK
key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
2
The System/Network menu appears.
3
Press the or key to select [Network Setting].
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
[ Exit
]
3 System/Network
Login User Name: L
b
*******************
Login Password:
[ Login
]
System/Network:
a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit
]
1 Network Setting