TA Triumph-Adler P-C2660 MFP - Manual (Page 409)

Default Setting (System Menu)
8-153
8
6 Press the OK key. Sleep Timer appears.
7 Press the  or  key or the numeric keys to set
the Sleep Timer. Set the amount of time before
entering the sleep state in minutes.
8 Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
Auto Error Clear
If an error occurs during printing, the print job stops to wait for the next step to be taken by the user. In the Auto
Error Clear mode, automatically clear the error after a set amount of time elapses.
The following errors are automatically cleared.
Cannot duplex print on this paper.
Send error.
Cannot connect to Authentication Server.
Incorrect account ID. Job is canceled.
Job Accounting restriction exceeded. Cannot print.
Job Accounting restriction exceeded. Cannot scan.
Job not stored. Press [OK].
Job Accounting restriction exceeded. Job is canceled.
Sub address/Polling box limit exceeded. Job is canceled.
Memory is full. Print job cannot be processed completely.
Maximum Number of scanned pages. Job is canceled.
Print overrun.
KPDL error.
USB memory error. Job is canceled.
No multi copies. Press [OK].
Auto Error Clear ON/OFF
Select whether to use Auto Error Clear or not.
Use the procedure below to specify the auto error clear setting.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Common Settings].
Sleep Timer: D b
(1 - 240)
******15*min.
Sys. Menu/Count.:a b
4 User/Job Account
5 User Property
*********************
[ Exit ]
6 Common Settings