TA Triumph-Adler P-C2660 MFP User Manual
Page 460
Default Setting (System Menu)
8-204
6
Press the OK key. The Basic menu screen
appears.
7
Press the or key to select [LAN Interface].
8
Press the OK key. The LAN Interface screen
appears.
9
Press the or key to select the desired [LAN
Interface].
The available LAN Interface are as follows:
Auto
10Base-Half
10Base-Full
100Base-Half
100Base-Full
1000Base-T
10
Press the OK key. Completed. is displayed and the
screen returns to the Basic menu.
MAC Address Filter
Select whether to use MAC Address Filter. The default setting is On.
Use the procedure below to setup the MAC Address Filter setting.
1
In the Sys. Menu/Count. menu, press the or
key to select [System/Network], and press the OK
key.
A login screen will appear. Then, enter the user ID
and password with administrator privileges to log
in, and press [Login] (the Right Select key).
Basic:
a b
*********************
2 TCP/IP Settings
3 Bonjour
[ Exit
]
1 Host Name
LAN Interface:
a b
*********************
2 10Base-Half
3 10Base-Full
[ Exit
]
1 Auto
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
[ Exit
]
3 System/Network
Login User Name: L
b
*******************
Login Password:
[ Login
]