PLANET WGSW-28040P - Manual (Page 145)

User’s Manual of WGSW-28040 / 28040P / 28040P4
145
4.7.6 IGMP Group Table
This page provides Multicast Database. The IGMP Group Table screen in Figure 4-7-9 appears.
Figure 4-7-9 Multicast Database page screenshot
The page includes the following fields:
Object Description
• VLAN ID
Display the current VID.
• Group IP Address
Displaymulticast IP address for a specific multicast service.
•
SIP Addresee Display the current source IP address.
• Member Port Display the current member port.
• Type Member types displayed include Static or Dynamic, depending on selected
options.
• Life(Sec)
Display the current life.
4.7.7 IGMP Router Setting
Depending on your network connections, IGMP snooping may not always be able to locate the IGMP querier. Therefore, if the
IGMP querier is a known multicast router/ switch connected over the network to an interface (port or trunk) on your Managed
Switch, you can manually configure the interface (and a specified VLAN) to join all the current multicast groups supported by the
attached router. This can ensure that multicast traffic is passed to all the appropriate interfaces within the Managed Switch.