PLANET WGSW-28040P - Manual (Page 55)

User’s Manual of WGSW-28040 / 28040P / 28040P4
55
The page includes the following fields:
Object Description
• Server Index
Select remote syslog server number for this drop down list.
• Server IP Provide the remote syslog IP address of this switch.
Default Port no.: 514
• Server Port
Provide the port nimber of remote syslog server.
• Severity The severity of the local log entry. The following severity types are supported:
emerg: Emergency level of the system unsable for local log.
alert: Alert level of the immediate action needed for local log.
crit: Critical level of the critical conditions for local log.
error: Error level of the error conditions for local log.
warning: Warning level of the warning conditions for local log.
notice: Notice level of the normal but significant conditions for local log.
info: Informational level of the informational messages for local log.
debug: Debug level of the debugging messages for local log.
Buttons
: Click to apply changes.
Figure 4-2-15 Remote Log Setting Status page screenshot
The page includes the following fields:
Object Description
• Status Display the current remote syslog state
• Server Info
Display the current remote syslog server information
• Severity
Display the current remote syslog severity
• Action Indicates the remote syslog server mode operation. Possible modes are:
Enabled: Enable emote syslog server mode operation.
When enable remote syslog server mode operation, the log and
messages will be recorded to the remote syslog server.
Disabled: Disable remote syslog server mode operation.