Bpdu guard, Point to point mac, Mcheck – PLANET WGSW-28040P User Manual
Page 293
User’s Manual of WGSW-28040 / 28040P / 28040P4
293
BPDU Guard
Description:
Sets the BPDU-Guard for specified port
Syntax:
spanning-tree port <port_list> bpdu-guard <enable|disable>
Parameters:
Port_list : Port list or 'all'
enable :Force enable
disable :Force disable
Example:
To set the BPDU guard:
WGSW-28040(config)# spanning-tree port 1 bpdu-guard enable
Point to Point MAC
Description:
Sets the point-to-point mac for specified port
Syntax:
spanning-tree port <port_list> point-to-point-mac <enable|disable|auto>
Parameters:
Port_list : Port list or 'all'
enable :Force enable
disable :Force disable
auto :Auto mode
Example:
To set the point-to-point mac:
WGSW-28040(config)# spanning-tree port 1 point-to-point-mac auto
Mcheck
Description:
Set the mcheck for specified port to migrate
Syntax:
spanning-tree port <port_list> mcheck
Parameters: